Hitemp Ceramic IndustriesHitemp Ceramic IndustriesHitemp Ceramic IndustriesHitemp Ceramic Industries
Latest Product
Hitemp Ceramic Industries
Hitemp thermocouple sheaths are used as protective covering over sensing elements





Heater Support
Heater Support







Laboratory Products :


COMBUSTION BOATSCombustion Boats

Hitemp Combustion Boats are used in the estimation of carbon in steel samples. The sample of steel drilling is taken in a combustion boat and placed inside a tube furnace maintained at 1300 deg to 1400 deg & oxygen is passed over it which combines with carbon of the steel & CO2 is estimated. Propirties of combustion Boats are High thermal shock resistance, High softening temperature & high resistance to corrosive action to molten steel. Combustion boats are made either by slip casting in plaster of paris moulds or by mechanical pressing.



 Combustion Bots Size( mm) 75 x 12 x9 85 x 13 x 9 88 x 13 x 10 95 x 13 x 10 100 x 16 x 12 100 x 18 x 13

COMBUSTION TUBE

Hitemp Combustion tubes are used in the Strohline apparatus for carbon & sulphur estimanition . Combustion boat carriying sample of steel is pushed in this tube .one end of Combustion tube is connected to the strohline appatatus & the other end is connected to the oxygen cylinder through a rubber tubing. Essential Properties of combustion tubes are High thermal shock resistance, High softening temperature & highly impervious.Combustion Tubesare made either by slip casting in plaster of paris moulds or by extrution

 Combustion Tubes Size( mm) 22 x 17 x 500 22 x 17 x 600 22 x 17 x 700 24 x 18 x 500 24 x 18 x 600 24 x 18 x 700
  26 x 20 x 500 26 x 20 x 600 26 x 20 x 700 29 x 22 x 600 29 x 22 x 700 29 x 22 x 750
  32 x 25 x 600 32 x 25 x 700 32 x 25 x 750      

MUFFLE TUBE & END CAPMuffle Tube and End Cap

Hitemp Muffle tube is an integral part of combustion furnace used in strohline apparatus. Two end caps are fitted on each side of muffle tube for holding the SIC Heating elements & Combustion tube. There is a centre hole in muffle tube to insert thermocouple. Muffle tubes are made either by slip casting in plaster of paris moulds or by extrution. Where as End caps are made by die pressing. End caps are available with 3 & 4 holes.

LECO CRUCIBLES

Leco Crucibles are used in the estimation of carbon in steel samples. The sample of steel is taken in a leco crucible and placed inside the leco apparatus. Propirties of Leco crucilbles are High thermal shock resistance, High softening temperature & high resistance to corrosive action to molten steel. Leco crucible are made by mechanical pressing.

SILLIMANITE & ALUMINA CRUCIBLES

Sillimanite and Alumina Crucibles
Crucibles are fabricated by slip casting method .They are highly refractory to withstand desired temperatures ,They posses have high thermal shock resistance. These are highly dense to ensure no loss of contents by absorption & are highly resistant to corrosive action of the contents.Used is Laboratories for Chemical Analysis & melting of glass & metals in industries. Alumina crucibles are used for coal analysis & melting rare metals & high melting point alloys. Alumina crucibles are highly resistant to acid & basic slag.

Some Standard SizesCrucibles : Grade - 99.5% Al2O3


OD
mm
ID
mm
Heigh
tmm
Vol
ml
20 16 30 05
30 26 40 15
35 30 50 30
40 36 60 60
50 44 75 120
65 55 100 240
 
UpperOD
mm
LowerID
mm
Height
mm
Vol
ml
30 174 24 10
41 18 37 25
48 20 41 40
54 24 50 60
60 26 50 80
66 30 56 100

Upper
OD mm
Lower
ID mm
Height
mm
Vol
ml
25 15 30 10
30 18 38 15
33 18 40 20
38 21 47 30
42 25 54 45
50 24 65 80
62 32 75 100
73 35 90 150

eIndiaBusiness MemberCopyright © Hitemp Ceramic Industries. All Rights Reserved
Site Designed & Promoted by Advent InfoSoft Pvt. Ltd.